Ph.D., Mechanical Engineering, Tsinghua University, 1992

M.S., Mechanical Engineering, Tsinghua University, 1989

B.S., Mechanical Engineering, Tsinghua University, 1986

2006.12-Present, Department of Mechanical Engineering, Tsinghua University, Professor

1994.12-2006.12, Department of Mechanical Engineering, Tsinghua University, Associate Professor

1992.10-1994.12, Department of Mechanical Engineering, Tsinghua University, Lecturer

Undergraduate course, “Fundamentals of Control Engineering” (3 Credits, 48 Units)

Undergraduate course, “Power Electronics and its Application” (2 Credits 32 Units)

Process Control and Automation of Material Processing (Welding)

Modern Power Conversion Technology and Advanced Materials Processing Equipment

Research Projects

2011-2013:Groove-wallPenetration Control Strategy and Environmental Adaptabilityfor Narrow-gap Arc Welding with Flux-cored Wire.NationalNaturalScienceFoundationofChina(No.51075231)

2010-2012：Multiple Information FusionBased Pulse Arc Sensorand Narrow-gap Groove-wall Penetration ControlbyDouble Pulse Arc Welding with Flux-cored Wire. Doctoral FoundationProjectof the Ministry of Education

2008-2010: Research on Automatic Narrow-gap Arc welding Technology and Equipment for Steel-rail. Major ProjectFounded by Research and Development Planof Science and Technology,the MinistryofRailways

2012-2014: Orbital Welding Robot Systemfor Steel Structure (Box-type, H-type).Project Supported by Enterprise

2009-2014: Series Inverter Welding Power Supply Systemswith Variable Polarity (ACSquare Wave).Project Supported by Enterprise

Scientific and Technological Progress Award (2nd-Class) of National Education Committee:High Power IGBT Inverter Type Arc Welding Power Source and the ZX7/WSM Series Model Technology,1997

Scientific and Technological Progress Award(Third-Class) of National Education Committee:Single End Forward Inverter Type Arc Welding Power Source, 1994

Application and Dissemination Awards of Scientific and Technological Achievements, Tsinghua University,1996, 1993

[1] Zhu Zhiming, Fan Kaiguo, Pan Jiluan. Development and application of steel-rail welding technology for high-speed railway. Welding & Joining, 2013(5): 5-10

[2] XiaZhuliang, ZhuZhiming, CHEN Junjie. Resonant procedure analysis and parameters design approach for phase-shift controlledfull-bridge power converter with zero-voltage and zero-current soft-switching. Electric Welding Machine, 2013, 43(1): 9-14+48

[3] LiuZhengwen, Meng Bin, JiGuanyu, ZhuZhiming, PanJiluan. Stability Analysis and Control of Welding Current for Automatic RailNarrow-gap Arc Welding System. Journal of Mechanical Engineering, 2011, 47(8): 110-115

[4] LiuZhengwen, Zheng Jun, JiGuanyu, Zhu Zhiming, PanJiluan. Automatic offset correction system of narrow gap arc welding torch for rail. Transactions of the China Welding Institution, 2011, 32(5): 45-48

[5] ChenJie,ZhuZhiming,WangLinhua,Zhao Gang. A novel secondary inverting circuit of the variable polaritywelding power supply and its control technology. Transactions of the China Welding Institution, 2009, 30(2): 29-33

[6] ZhuZhiming, Zhao Gang, ChenJie, WangLinhua. Full-load range zero-voltage zero-current soft-switching inverterarc welding power supply. Transactions of the China Welding Institution, 2009, 30(2): 9-12