2022.07-present, Institute of Mechatronic Engineering, Department of Mechanical Engineering, Tsinghua University, Beijing. Assistant Professor.
2020.06-2022.07, Institute of Manufacturing Engineering, Department of Mechanical Engineering, Tsinghua University, Beijing. Postdoctoral Researcher.
Selected publications in recent 5 years
[1] Kehui Hu, Pengcheng Zhao, Jianjun Li, Zhigang Lu*. High-resolution multiceramic additive manufacturing based on digital light processing. Additive Manufacturing. 2022, 54, 102732.
[2] HU Kehui, Lü Zhigang, LU Kuan, LIANG Jingjing. Additive Manufacturing of Complex Ceramic Cores and Verification of Casting Process. Journal of Mechanical Engineering, 2021, 57(3): 227-234.（Cover story）
[3] Ke-hui Hu, Hao-yuan Wang, Kuan Lu, Qian Feng, Dao-ding Yang, Jian Cao, Bo Zhang, Zhi-gang Lü*, Xing Ran*. Fabrication of silica-based ceramic cores with internal lattice structures by stereolithography. China Foundry, 2022, 19(5):369-379.（Cover story）
[4] Kehui Hu, Yameng Wei, Zhigang Lu*, Li Wan, Peijie Li. Design of a Shaping System for Stereolithography with High Solid Loading Ceramic Suspensions. 3D Printing and Additive Manufacturing, 2018, 5(4): 311-318.
[5] Xinyi Li#, Kehui Hu#, Zhigang Lu*. Effect of light attenuation on polymerization of ceramic suspensions for stereolithography. Journal of the European Ceramic Society, 2019, 39(7): 2503-2509.
[6] He Li#, Kehui Hu#, Yongsheng Liu*, Zhigang Lu*, Jingjing Liang. Improved mechanical properties of silica ceramic cores prepared by 3D printing and sintering processes. Scripta Materialia. 2021, 194:113665.
[7] Haoyuan Wang, Kehui Hu*, Kuan Lu, Zixiong Zheng, Zhigang Lu*. Experimental and numerical analysis on the leading-edge bulge effect during the recoating process in ceramic stereolithograph. Additive Manufacturing, 2022, 51, 102652.
[8] Qian Feng, Xing Ran, Ke-hui Hu*, Hao-yuan Wang, Zhi-gang Lü*. Application of transparent casting moulds prepared by additive manufacturing technology in hydraulic simulation. China Foundry, 2022, 19(4):299-306.
[9] Pengcheng Zhao, Kehui Hu*, Haoyuan Wang, Xinyi Li, Zhigang Lu*. Effect of organic fibers addition on digital light processing for Al2O3 porous ceramics. Ceramics International, 2021, ISSN 0272-8842.
[10] Guang Zhao, Kehui Hu*, Qian Feng, Zhigang Lu*. Creep mechanism of zircon-added silica ceramic cores formed by stereolithography. Ceramics International, 2021, 47(12): 17719-17725.
[11] Yanting Han, Qianqian Wei, Pengbo Chang, Kehui Hu*, Oseweuba Valentine Okoro, Amin Shavandi*, Lei Nie*. Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application. Crystals, 2021, 11(4), 353.
[12] Chuchu Qian, Kehui Hu, Zhigang Lu*, Peijie Li*. Volume shrinkage and conversion rate of Al2O3 ceramic stereolithography suspension polymerised by ultraviolet light. Materials Chemistry and Physics, 2021, 267:124661.
[13] Chuchu Qian, Kehui Hu, Junhua Li, Zhigang Lu*, Peijie Li*. The Effect of Light Scattering in Stereolithography Ceramic Manufacturing. Journal of the European Ceramic Society, 2021, 14(41):7141-7154.
[14] Yameng Wei, Kehui Hu, Zhigang Lu*. Effect of SiO2 concentration in silica sol on interface reaction during titanium alloy investment casting. China Foundry, 2018, 15(1): 23-30.
[15] Heng Zhang, Yong Yang*, Kehui Hu, Bin Liu, Meng Liu, Zhengren Huang. Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics, Additive Manufacturing, 2020, 34: 101199.
[16] Di Zhao, Haijun Su*, Kehui Hu, Zhigang Lu, Xiang Li, Dong Dong, Yuan Liu, Zhonglin Shen, Yinuo Guo, Haifang Liu, Guangrao Fan, Jun Zhang, Lin Liu, Hengzhi Fu. Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processing. Additive Manufacturing, 2022, 52, 102650.
[17] Chuchu Qian, Xinyi Li, Kehui Hu, Peijie Li*, Zhigang Lu*. Thermal Behaviour in the Stereolithography Process for Al2O3 Ceramic Suspension. Key Engineering Materials, 2021, 871:189-202.
(*Corresponding author. #Equal authorship.)
