1996, Ph. D., Tsinghua University, Dept. of Mechanical Engineering
1996, M. S., Tsinghua University, Dept. of Mechanical Engineering
1992, B. S., Tsinghua University, Major in Mechanical Engineering
1992, B. S., Tsinghua University, Major in Economics and Management
2016- Tsinghua University, Department of Mechanical Engineering,
Deputy Director of Institute of Materials Processing Equipment and Automation
2014-2015 UCLA, Department of Mechanical and Aerospace Engineering, Visiting scholar
2013- Tsinghua University, Department of Mechanical Engineering,Director of NDT Research Center.
2000-2000 Korea Research Institute of Science and technology, Visiting scholar
1999- Tsinghua University, Associated Professor
1996-1999 Tsinghua University, Lecture
1. NDT principle and technology
- Ultrasonic testing and eddy current testing for metal materials
- Automatic ultrasonic testing system for aviation composites
- NDT technology for welds (thick walled welds, welds of friction stir welding, Austenitic weld, etc.)
- NDT for performance degradation of materials (creep, fatigue and stress)
2. Automatic control system of material processing process
Research Status
1. Study on Ultrasonic Array Imaging Method for Thick Walled Welds, project supported by National Natural Science Foundation of China (No. 51375258), 2014-2017
2. Study on acoustic emission location algorithm and instrument modules, project supported by enterprise, 2015-2016
3. Developments of Signal Processing Method about Full Matrix Capture UT (FMC-UT) for Casting Material Testing, international cooperation project, 2014-2015
4. Electromagnetic Testing System for Content of Retained Austenite, project supported by enterprise, 2013-2014
5. Development and Experiment of Fuel Ball Detecting Device in High Temperature Gas Cooled Reactor, sub-project of the Eleventh Five-Year Project “HTR-RM”, 2010-2014
6. Bonding Quality Test for Heat-shrinkable Tape of Pipeline Joint Coatings, project supported by enterprise, 2012-2013
7. Ultrasonic Testing Method for Creep Failure in Thick Walled Welds, international cooperation project, 2011-2013
8. Research on Signal Processing and Inversion Imaging of Guided Waves in Plate, project supported by enterprise, 2010-2011
9. Research on Detecting Method for Broken Rail of High Speed Railway, international cooperation project, 2010-2011
1. Beijing science and Technology Award (2nd-Prize), Key technology and engineering application of quality assurance for manufacturing process of long distance oil and gas pipeline, 2015
2. 2nd-Class Tsinghua Education Award, Exploration on new curriculum system for NDT Catalogue, 2008
3. 2nd-Class Tsinghua Education Award, Emphasizing Knowledge Application, Improving Comprehensive Ability-- Curriculum Construction and Talent Cultivation for Electromechanical Control Catalogue of Material Processing Subject, 2006
Patents
1. Fuel Ball Detecting Method and External Detecting System for Loading-Unloading System of Pebble-bed Reactor, ZL 20051 0136309.4
2. Nozzle Used for Water-Spray Ultrasonic Nondestructive Testing, ZL 200910235210.8
3. External Fuel Ball Detecting Method And Device For Pebble-bed High Temperature Gas Cooled Reactor, ZL 200910250491.4
4. Control Method for Time-Varying Output Characteristics of Inverse Arc-Welding Power Source for CO2 Welding, ZL 97 1 04402.3
Selected Publications
1 Zandong Han, HaipengZhou, HaiquanZhang, DongDu. A detecting method for spherical fuel elements in pebble-bed HTGR using eddy current detection. NDT&E International 79(2016) 81–91.
2 YUAN Keyi, HAN Zandong, ZHOU Haipeng, ZHONG Yuexian. Ultrasonic inspection for metal creep based on Flight-time-attenuation. Applied Mechanics and Materials, 2014, 599-601：164-168.
3 Xiaoyang Li, Zandong Han. Effect of uniaxial stress on magnetic permeability and magnetic loss of low-carbon steel in weak alternating magnetic field. Applied Mechanics and Materials. Vol. 678(2014) pp 220-227.
4 Lu Shuanghao, Han Zandong, Wang Weibin, et al. Research on Over-ground Electromagnetic Inspection Technique for Buried Pipelines. Applied Mechanics and Materials, Vols. 239-240:293-300, 2013.
5 Zhang Kun, Han Zandong, Yuan Keyi. Long range inspection of rail-break using ultrasonic guided wave excited by pulse string. Advanced Materials Research, 2013, 744: 505-510.
6 Yuan Keyi, Han Zandong, Chen Yifang, et al. Detection of creep damage in P91 steel weldments using nonlinear ultrasonic technique. Transactions of the China Welding Institution, 2013, Vol.34, No.9. P83~86.
7 Han Zandong, Wang Bingfang, Yuan Keyi, et al. Ultrasonic Scanning Imaging for Austenitic Thick-wall Welds. Material Engineer, 2012, No.9, P62-65.
8 Zhu Xinjie, Han Zandong, Du Dong, et al. Imaging of Ultrasonic Guided Waves in Plate Based on Characteristic of Elliptical Cluster Tracks for Line-arc Kind of Array. Journal of Mechanical engineering. Vol.48, No.22, 2012, P14-20.
9 Wang Bingfang, Han Zandong, Yuan Keyi, et al. Signal processing in ultrasonic test of austenitic welds based on time-frequency analysis. Transactions of the China Welding Institution, Vol.32, No.5, 2011, P25-28.
10 Zhu Xinjie, Han Zandong, Du Dong, et al. Imaging and testing of ultrasonic SH guided waves in plate with lap welding structure. Advanced Materials Research, 2011, Vol.301-303: 603-609.
11 Zhang Liang, Han Zandong, Wang Bingfang. Optimization design of eddy current sensor for fuel balls detection based on electromagnetic field simulation. International Journal of Applied Electromagnetics and Mechanics, Vol.33, No.1-2, 2010, P549-557.
12 Wan Binfang, Han Zandong, Yuan Keyi, et al. Research on Water-Squirting Ultrasonic Testing Parameter for Composite Material .Nondestructive Testing, Vol32, No.8, 2010, P616-619, 630.
13 Wan Binfang, Han Zandong, Zhu Xianjie, et al. Ultrasonic propagation characteristics in thick-wall welds and selection of testing conditions. Journal of Tsinghua University, Vol.50, No.11, 2010, P1789-1792, 1797.
14 Zandong HAN, Keyi YUAN, Liang ZHANG, Yifang CHEN. A Detection Method for the Fuel Balls Passing Through the Pipeline of Pebble-bed High Temperature Gas Cooled Reactor. 17 WCNDT，Shanghai，China，25-28，Oct，2008
15 Han Zandong, Gibum Lee. Application of Petri nets for deadlock analysis and avoidance in flexible manufacturing systems. The International Journal of Advanced Manufacturing Technology, 2005, No.25: 735~742
16 Lee GB，Han ZD，Lee JS. The MTTF and reliability evaluation of a PLC system. KEY ENGINEERING MATERIALS, Part 1~3, 2004: 1719~1724
17 Gi-Bum Lee, Han Zandong, Jin S. Lee, Automatic generation of LD with control petri net. Journal of intelligent manufacturing, 2004, No.2: 245~252
18 Zhu Zhiming, Han Zandong, 39th Chapter “Digital monitoring and control technology for welding process”, Welding Manual, China Machine Press, 860-894, 2016
19 Lee GB, Han Zandong, 19th chapter “Reachability Criterion with Sufficient Test Space for Ordinary Petri Net” in “Petri Nets – Manufacturing and Computer Science”, InTech, 2012.
