清华大学机械系  材料成形制造团队 助理研究员 2022.06—至今

清华大学机械系  材料成形制造团队 博士后  2020.06—2022.06

澳大利亚莫纳什大学  材料科学与工程系  访问研究员  2019.01—2019.02

英国剑桥大学 先进材料研究院  访问研究员  2018.04—2018.05

日本产业综合技术研究所(AIST)    轻合金设计中心  访问研究员  2017.06—2017.09

大阪大学基础工学研究科  纳米材料科学中心 访问研究员  2016.06—2016.09

主要从事基于热塑性变形条件下轻合金材料的组织性能调控及其功能性改善与开发。目前主要科研方向如下：

高强耐腐蚀超轻合金制备及其连接技术：

生物亲和镁合金设计，制备和性能改善：

低温超塑性轻合金制备：

材料流动与变形机制原位表征观测：

1. M Zhou, Y Sun, M Yoshiaki, K Ushioda, H Fujii *, "Quasi-in-situ investigation into the microstructure and texture evolution of pure magnesium during friction stir welding." Journal of Magnesium and Alloys (2020), IF:10.08.

2. M Zhou, X Huang, Y Morisada, H Fujii *, Y Chino, "Effects of Ca and Sr additions on microstructure, mechanical properties, and ignition temperature of hot-rolled Mg–Zn alloy." Materials Science and Engineering: A 769(2020).IF:5.23.

3. M Zhou, Y Morisada, H Fujii *,  "Effect of Ca addition on the microstructure and the mechanical properties of asymmetric double-sided friction stir welded AZ61 magnesium alloy." Journal of Magnesium and Alloys 8.1(2019).IF:10.08.

4. M Zhou, Y Morisad, H Fujii *, T Ishikawa, "Mechanical properties optimization of AZX612-Mg alloy joint by double-sided friction stir welding." Journal of Materials Processing Technology (2017):91-99.IF:5.55.

5. M Zhou, Y Morisada, H Fujii*, J Wang, Pronounced low-temperature superplasticity of friction stir processed Mg–9Li–1Zn alloy." Materials Science and Engineering A 780.7(2020):139071.IF:5.23.

6. M Zhou, Y Morisada, H Fujii*, J Wang, "Microstructure and mechanical properties of friction stir welded duplex Mg-Li alloy LZ91." Materials Science and Engineering A, 773.Jan.31(2020):138730.1.IF:5.23.

7. Z Zeng, M Zhou, P Lynch, F Mompiou, Q Gu, M Esmaily, Y Yan, Y Qiu, S Xu, H Fujii, C Davies, J Nie, N Birbilis*, "Deformation modes during room temperature tension of fine-grained pure magnesium". Acta Materialia, 116648 (2021).IF:8.23.

8. S Zhang, G Chen, T Qu, J Wei, Y Yan, Q Liu, M Zhou, G Zhang, Z Zhou, H Gao, D Yao, Y Zhang, Q Shi*, H Zhang,  "A novel aluminum-carbon nanotubes nanocomposite with doubled strength and preserved electrical conductivity." Nano Research (2021): 1-7.IF:8.89.

9. Y Liu, G Chen, H Zhang, C Yang, S Zhang, Q Liu, M Zhou, Q Shi*. “In situ exfoliation of graphite for fabrication of graphene/aluminum composites by friction stir processing”, Materials Letters 301(2021)130280. IF:3.42.

10. F Long, G Chen, M Zhou, Q Shi, Q Liu*, Simultaneous enhancement of mechanical properties and corrosion resistance of as-cast Mg-5Zn via microstructural modification by friction stir processing, Journal of Magnesium and Alloys (2021). Accepted. IF:10.08.

11. Z Zeng*,M Zhou*, et. al.  “Corrosion resistant and high-strength dual-phase Mg-Li-Al-Zn alloy by friction stir processing”, Communications Materials, (2021). IF:6.78

12. M Zhou, et. al. “A novel Fe/Cu interface with excellent mechanical properties fabricated by friction stir welding”, Journal of Manufacturing Processes, (2021), IF:4.46.

13. M Zhou, et.al, Effect of the processing route on the microstructure and mechanical behavior of superlight Mg-9Li-1Zn alloy via friction stir processing, Journal of Magnesium and Alloys (2020), IF:10.08.

14. 一种高强韧镁锂合金及其制备方法。专利号：CN113502422 B，本人排名：1 （已授权）

15. 一种抗时效高强韧耐腐蚀双相镁锂合金及其制备方法。专利号：CN113502434 B，本人排名：1（已授权）

博士期间获得日本文部科学省（MEXT）主持Leading Program博士项目奖学金。

日本焊接学会2017年优秀研究奖“Mg-Li合金的搅拌摩擦焊接”