发表学术论文150余篇，其中SCI、EI收录100余篇，近期代表性学术论文：
1. C. Zhang, B. Li, P. Ye and H. Zhang, "Analog-Hall-Sensor-Based Position Detection Method with Temperature Compensation for Permanent-Magnet Linear Motor," in IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1-11, 2021.
2. J. Jiang, F. Lin, B. Li, J. Xiao, H. Zhang and P. Ye, A Two-step Tuning Method of Control Parameters for Permanent Magnet Synchronous Linear Motor[C]. Advanced Information Technology, Electronic and Automation Control Conference (IAEAC), 2021.
3. J. Jiang, F. Lin, B. Li, H. Zhang and P. Ye, Prediction and Compensation Strategy of Contour Error in Multi-Axis Motion System[J]. The International Journal of Advanced Manufacturing Technology, 2021.
4. C. Zhang, B. Li, P. Ye and H. Zhang, "Analysis and Compensation of Hall Sensor-Based Position Detection Errors in TPMSLM," in IEEE Sensors Journal, vol. 21, no. 20, pp. 22612-22622, 15 Oct.15, 2021.
5. Zhang C, Ye P, Zhang H. The Sensorless Control of Tublar Permanent Magnet Linear Motors Considering the End Effect[C]. 5th Advanced Information Technology, Electronic and Automation Control Conference. 2021.
6. Li B, Zhang H, Ye P, et al. Trajectory smoothing method using reinforcement learning for computer numerical control machine tools. Robotics and Computer-Integrated Manufacturing, 2020, 61: 101847.
7. Zhang C, Ye P, Zhang H. Flux linkage and Inductance Analysis of Long-Stroke TPMSLM[C]. 22nd International Conference on Electrical Machines and Systems. 2019.
8. Zhang Y, Ye P Q, Zhao M Y, Zhang H. Data-based tracking error prediction and dynamic feedrate optimization for parametric toolpath. Mechanical Systems and Signal Processing, 2019, 120: 221-233.
9. Zhang Y, Zhao M Y, Ye P Q, Jiang J L, Zhang H. Optimal curvature-smooth transition and efficient feedrate optimization method with axis kinematic limitations for linear toolpath. International Journal of Advanced Manufacturing Technology, 2018, 99(1-4): 169-179.
10. Zhang Y, Ye P Q, Wu J Q, Zhang H. An optimal curvature-smooth transition algorithm with axis jerks’ limitations along linear segments. International Journal of Advanced Manufacturing Technology, 2018, 95(1-4): 875-888.
11. Zhang Y, Ye P Q, Zhang H, Zhao M Y. A local and analytical curvature-smooth method with jerk-continuous feedrate scheduling along linear toolpath. International Journal of Precision Engineering and Manufacturing, 2018, 19(10): 1529-1538.
12. Ye P Q, Zhang Y, Xiao J X, Zhao M Y, Zhang H. A novel feedrate planning and interpolating method for parametric toolpath in Frenet-Serret frame. International Journal of Advanced Manufacturing Technology, 2018, 1-11.
13. Li B, Zhang H, Ye P. Error constraint optimization for corner smoothing algorithms in high-speed CNC machine tools. The International Journal of Advanced Manufacturing Technology, 2018, 99(1-4): 635～646.
14. Li B, Zhang H, Ye P. Driving Force Constraint Corner Smoothing Method for High-Speed Machine Tools. ASME 2017 International Mechanical Engineering Congress and Exposition, Pittsburgh, USA, 2017.
15. 张春雷,张辉,叶佩青,张鲁宏.两相无槽圆筒型永磁同步直线电机电感计算与分析[J].电工技术学报,2021,36(06):1159-1168.
16. 张勇, 叶佩青, 肖建新, 张辉. 基于 Bezier 曲线的小直线段局部转接光顺研究.机械工程学报, 2018, 54(19):111-120.
17. 李炳燃, 张辉, 叶佩青. 永磁同步直线电机霍尔位置检测传感器的优化. 中国机械工程 , 2017, 28(24): 2913-2918.
18. 李炳燃, 张辉, 叶佩青. 智能制造环境下的数控系统发展需求. 航空制造技术, 2017, (06): 24-30.
19. 严乐阳, 叶佩青, 张勇. 圆筒型永磁直线同步电机用线性霍尔位置检测的误差补偿[J]. 电工技术学报, 2017, 32(5): 26-32. 2017-3-10
20. 严乐阳, 叶佩青, 张辉. 基于多周期迭代滑模控制的直线电机干扰抑制[J].电机与控制学报, 2017, 21(1):8-13. 2017-1-15
发明专利
1. US11038445B2/EPC17933001.4，Dual-Sensing Feedback and Transmission System for Linear Motor
2. ZL202010253771.7，内螺纹磨削过程的磨削力测量方法
3. ZL202010680141.8，一种提升螺纹车削加工精度的主轴跟随同步控制方法
4. ZL202010680809.9，一种基于神经网络的数控系统运动轨迹控制方法
5. ZL202011003079.5，一种基于直纹面空间的五轴铣削刀轴矢量优化方法
6. ZL201910149425.1，一种恒力约束条件下的数控机床加减速速度规划方法
7. ZL201910853242.8，一种双五轴镜像铣机床的精度自诊断方法
8. ZL201910140337.5，一种用于多叶光栅系统的插接式位置传感装置
9. ZL201910140364.2，一种用于多叶光栅直线电机的电阻式传感器
10. ZL201510259813.7，对呼吸产生的肿瘤运动进行在线补偿的方法及系统
