2020/12-至今，清华大学机械工程系，副教授

2014/08-2015/08，University of California, Berkeley, ME，访问学者

2012/12-2020/12，清华大学机械工程系，讲师/助理教授

2011/07-2012/12，清华大学精密仪器与机械学系，讲师

2009/03-2011/05，清华大学精密仪器与机械学系，博士后

本科生课程：

• 机械设计基础A（2）、B（2）——机械原理

• 机械设计基础A（3）——机械设计

• 机械设计综合实践

研究领域：流体密封与润滑、微流体与微流控技术、生医机械与生物流体

（1）密封与润滑理论及技术

面向重大能源动力装备，研究气体、液体和多相流体在复杂和极端工况条件下的迁移、承载和能量传递规律；发展高参数流体密封与润滑理论，开发新型高性能密封和润滑技术。

（2）微流体和微流控技术

研究气体、液体和多相流体在微尺度和复杂界面条件下的质量和能量输运规律；开发微流体输运的调控技术和微流体驱动技术。

（3）生医机械与生物流体技术

研究人工心脏泵、人工瓣膜等植入/介入式生医机械的设计理论和关键技术；开发基于生物微流控芯片的生物流动分析检测技术。

代表性论文

[1] Xiangyu Hu#, Yongjian Li#, Jiang Li, Haosheng Chen*. Effects of altered blood flow induced by the muscle pump on thrombosis in a microfluidic venous valve model. Lab on a Chip, DOI: 10.1039/d0lc00287a.

[2] Xiaobing Zheng, Yongjian Li*, Haosheng Chen, Shengshou Hu, Jiangye Zhou*. Investigation on hydrodynamic lubrication of bearings in a left ventricular assisted device. Friction, 2020, 8(4): 746-754.

[3] Qiang He, Yongjian Li, Weifeng Huang*, Yang Hu, Yuming Wang. Phase-field-based lattice Boltzmann model for liquid-gas-solid flow. Physical Review E, 2019, 100: 033314.

[4] Han Ge, Yongjian Li, Haosheng Chen. Ultrasonic cavitation noise in suspensions with ethyl cellulose nanoparticles. Journal of Applied Physics, 2019, 125: 225301.

[5] Yuanyuan Chen, Yongjian Li, Donghai Li, Jiang Li, Haosheng Chen. Margination mechanism of stiffened red blood cell in microchannel with different cross-section shapes, Microfluidics and Nanofluidics, 2019, 23: 25.

[6] Donghai Li, Yongjian Li, Guiling Li, Yu Zhang, Jiang Li, Haosheng Chen. Fluorescent reconstitution on deposition of PM2.5 in lung and extrapulmonary organs. Proceedings of the National Academy of Sciences of the United States of America, 2019, 116: 2488-2493.

[7] Yongjian Li, Xiangyu Hu, Shuaishuai Liang, Jiang Li, Haosheng Chen*. Cleaning of fluid-infused surfaces in microchannels. Langmuir, 2018, 34: 12532-12537.

[8] Jie Jiang, Yiyong Yang*, Yongjian Li*, Weifeng Huang. Theoretical and experimental investigation on maximum pressure loads of labyrinth seal’s teeth. Advances in Mechanical Engineering, 2018, 10(10): 1-8.

[9] Yongjian Li, Xiangyu Hu, Heping Li, Yu Zhang, Haosheng Chen*. Investigation of cold atmospheric plasma treatment in polydimethylsiloxane microfluidic devices with a transmural method. Journal of Physics: Condensed Matter, 2018, 30(38): 384001.

[10] Jie Jiang, Yiyong Yang*, Weifeng Huang, Yongjian Li*. Numerical and experimental investigation on uniformity of pressure loads in labyrinth seal. Advances in Mechanical Engineering, 2017, 9(9): 1-8.

[11] Yuanyuan Chen，Donghai Li, Yongjian Li, Jiandi Wan, Jiang Li, Haosheng Chen*. Margination of Stiffened Red Blood Cells Regulated By Vessel Geometry. Scientific Reports, 2017, 7: 15253.

[12] Du Kaibing, Li Yongjian*, Suo Shuangfu, Wang Yuming. Semi-Analytical Dynamic Analysis of Non-contacting Finger Seals. International Journal Structural of Stability and Dynamics, 2015, 15(4): 1450060-1-13.

[13] Y Liu*, W Liu, YJ Li, XF Liu, YM Wang. Mechanism of a wavy-tilt-dam mechanical seal under different working conditions. Tribology International, 2015, 90: 43-54.

[14] Kaibing Du, Yongjian Li*, Shuangfu Suo, Yuming Wang. Dynamic Leakage Analysis of Noncontacting Finger Seals Based on Dynamic Model. Journal of Engineering for Gas Turbines and Power, 2015, 137(9): 09250-1-7.

[15] Tao Wang, Weifeng Huang*, Xiangfeng Liu, Yongjian Li, Yuming Wang. Experimental study of two-phase mechanical face Seals with laser surface texturing. Tribology International, 2014, 72: 90-97.

[16] Shouqing Huang*, Shuangfu Suo, Yongjian Li, Jun Ding, Yuming Wang. Experimental Investigation on Fiber Thermocouples Used in Brush Seals for Temperature Measurements. Journal of Engineering for Gas Turbines and Power, 2014, 136(9): 091602-1-6.      

[17] Shouqing Huang*, Shuangfu Suo, Yongjian Li, Yuming Wang. Theoretical and experimental investigation on tip forces and temperature distributions of the brush seal coupled aerodynamic force. Journal of Engineering for Gas Turbines and Power, 2014, 136(5): 52502.

[18] Yi Xie, Yongjian Li*, Yuming Wang, Shuangfu Suo, Xiangfeng Liu. An experimental investigation of tribological performance of triangular textures in water lubrication regime. Science China Physics, Mechanics & Astronomy, 2014, 57(2): 273-279.

[19] Yi Xie, YongJian Li*, ShuangFu Suo, XiangFeng Liu, JingHao Li, YuMing Wang. A mass-conservative average flow model based on finite element method for complex textured surfaces. Science China Physics, Mechanics & Astronomy, 2013, 56(10): 1909-1919.

[20] Yongjian Li*, Haosheng Chen, Jiadao Wang, Darong Chen. Effect of grooves on cavitation around the body of revolution. Journal of Fluids Engineering - Transactions of the ASME, 2010, 132(1): 11301(1-7).

授权发明专利

[1] 李永健, 胡翔宇, 索双富, 黄伟峰, 郭飞, 王子羲, 高志, 王玉明. 一种有鳍片的低迟滞接触式指尖密封. 201610878878.4.

[2] 李永健, 胡翔宇, 索双富, 黄伟峰, 郭飞, 刘向锋, 高志, 王玉明. 一种有肋片的非接触式指尖密封. 201610878473.0.

[3] 杜凯冰, 李永健, 索双富, 黄首清, 王玉明. 一种后挡板带微孔织构非接触式指尖密封装置. 201510156112.0.

[4] 李永健, 黄伟峰, 刘莹, 索双富, 高志, 刘向锋, 王玉明. 螺旋分布收敛型微孔织构机械密封. 201410191186.3.

[5] 杜凯冰, 李永健, 索双富, 黄首清, 王玉明. 一种非接触指尖-迷宫-刷式复合式密封. 201510158126.6.

[6] 索双富, 黄首清, 李永健, 吴长贵, 迪力夏提.艾海提, 黄伟峰, 王玉明. 一种可调径向间隙的刷式密封结构. 201410256244.6.

[7] 刘莹, 刘伟, 刘道生, 高志, 黄伟峰, 李永健, 刘向锋, 王玉明. 一种轴线可调立式机械密封试验台. 201310412677.1.

[8] 黄首清, 李永健, 索双富, 杜凯冰, 王玉明. 一种刷式密封和指尖密封的复合密封. 201410023179.2.

[9] 李永健, 黄首清, 索双富, 杜凯冰, 高志, 王玉明. 一种多功能刷式密封实验系统. 201310013175.1.

[10] 黄首清, 索双富, 李永健, 谭世勇, 黄伟峰, 王玉明. 一种利用压电效应的低泄漏刷式密封结构.

[11] 刘莹, 索双富, 温庆丰, 沈强, 高志, 李永健, 黄伟峰, 王玉明. 一种保压检修密封实验台. 201110286929.1.

[12] 索双富, 李永健, 黄伟峰, 高志, 刘莹, 刘向锋, 王玉明. 一种高温气冷堆保压检修密封控制系统. 201110135046.0.

[13] 索双富, 吴琼, 黄伟峰, 李永健, 廖传军, 王玉明. 一种核主泵用螺栓松动监测装置及其监测方法. 201110030989.7.

[14] 黄伟峰, 高志, 王玉明, 王涛, 索双富, 刘莹, 刘向锋, 李永健, 吴辰绅. 一种带有过渡槽壁结构的螺旋槽端面密封装置. 201010280284.6.

[15] 高志, 李永健, 索双富, 黄伟峰, 刘莹, 刘向锋, 王玉明. 一种用于反应堆冷却剂泵或冷却剂风机检修的密封机构. 201010168182.5.

专著、编著和译著

[1] 刘莹、吴宗泽主编，机械设计教程，机械工业出版社，北京，2019.（参编）

[2] 王玉明、索双富、李永健、刘向锋、郭丹、王子羲主编，高端轴承发展战略研究报告，清华大学出版社，北京，2016.

[3] Alan O. Lebeck著，黄伟峰、李永健、王玉明等译，机械密封原理与设计，机械工业出版社，北京，2016.

[4] Chen H.S., Li Y.J. Computational Studies on Drag Reduction Effect by Surface Grooves, Chapter 6, Applied Physics in the 21st Century, (Horizons in World Physics, Volume 266) , NOVA SCIENCE PULISHERS, Inc. USA. 2010.

• 2018年中国机械工业科技奖一等奖；

• 2016年教育部自然科学奖一等奖；

• 2009年英国机械工程师学会年度最佳论文奖；