2021.02-至今，清华大学机械工程系，助理教授

2020.08-2021.01，德国卡尔斯鲁厄理工学院，“洪堡”学者

2019.11-2020.07，美国西北大学，博士后

2017.10-2019.10，香港中文大学，博士后

从事极端制造领域创新性研究工作。研究兴趣主要在于：面向航空航天、能源环境等国家重大战略领域的应用需求，研究基于非传统物理过程的极端制造工艺基础理论与关键技术。近年来以主要作者在先进制造领域知名期刊上发表SCI/EI收录论文30余篇。研究方向主要包括：

1、高性能超声加工工艺与装备

2、仿生功能表面微纳机械加工

3、声学超材料器件设计与应用

欢迎对我们研究方向感兴趣的同学加入课题小组攻读博士学位或者从事博士后。有意者请将个人简历和相关证明材料发送至以下邮箱：wangjjthu@tsinghua.edu.cn.

近期（2016-）以主要作者发表的论文

[1] Pang Y, Feng P, Wang J, et al. Performance analysis of the longitudinal-torsional ultrasonic milling of Ti-6Al-4V[J]. The International Journal of Advanced Manufacturing Technology. 2021: 1-12.

[2] Wang J, Liao W, Guo P. Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations[J]. International Journal of Mechanical Sciences. 2020, 170: 105347.

[3] Wang J, Wang Y, Yang Y, et al. Fabrication of structurally colored basso-relievo with modulated elliptical vibration texturing[J]. Precision Engineering. 2020, 64: 113-121.

[4] Wang J, Yang Y, Zhu Z, et al. On ductile-regime elliptical vibration cutting of silicon with identifying the lower bound of practicable nominal cutting velocity[J]. Journal of Materials Processing Technology. 2020: 116720.

[5] Wang Y, Wang J, Chen A, et al. Structural coloration using face turning and variable tool vibration frequency[J]. Journal of Manufacturing Processes. 2020, 56: 1392-1396.

[6] Wang J, Yang R, Gao S, et al. Modulated vibration texturing of hierarchical microchannels with controllable profiles and orientations[J]. CIRP Journal of Manufacturing Science and Technology. 2020, 30: 58-67.

[7] Wang J, Yang Y, Yang R, et al. On the validity of compliance-based matrix method in output compliance modeling of flexure-hinge mechanism[J]. Precision Engineering. 2019, 56: 485-495.

[8] Wang J, Du H, Gao S, et al. An ultrafast 2-D non-resonant cutting tool for texturing micro-structured surfaces[J]. Journal of Manufacturing Processes. 2019, 48: 86-97.

[9] Wang J, Zhang J, Feng P, et al. Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: a critical review[J]. Ceramics International. 2018, 44(2): 1227-1239.

[10] Wang J, Zhang J, Feng P, et al. Experimental and theoretical investigation on critical cutting force in rotary ultrasonic drilling of brittle materials and composites[J]. International Journal of Mechanical Sciences. 2018, 135: 555-564.

[11] Wang J, Zhang J, Feng P, et al. Feasibility study of longitudinal–torsional-coupled rotary ultrasonic machining of brittle material[J]. Journal of Manufacturing Science and Engineering. 2018, 140(5).

[12] Wang J, Feng P, Zhang J. Reducing edge chipping defect in rotary ultrasonic machining of optical glass by compound step-taper tool[J]. Journal of Manufacturing Processes. 2018, 32: 213-221.

[13] Wang J, Feng P, Zhang J, et al. Experimental study on vibration stability in rotary ultrasonic machining of ceramic matrix composites: cutting force variation at hole entrance[J]. Ceramics International. 2018, 44(12): 14386-14392.

[14] Wang J, Feng P, Zhang J, et al. Reducing cutting force in rotary ultrasonic drilling of ceramic matrix composites with longitudinal-torsional coupled vibration[J]. Manufacturing letters. 2018, 18: 1-5.

[15] 王健健，张建富，冯平法. 航空先进材料旋转超声椭圆振动加工研究进展[J]. 航空制造技术. 2018, 61(21): 30-37.

[16] Wang J, Yang Y, Guo P. Effects of vibration trajectory on ductile-to-brittle transition in vibration cutting of single crystal silicon using a non-resonant tool[J]. Procedia CIRP. 2018, 71: 289-292.

[17] Feng P, Wang J, Zhang J, et al. Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites[J]. Ceramics International. 2017, 43(1): 791-799.

[18] Wang J, Feng P, Zhang J, et al. Investigations on the critical feed rate guaranteeing the effectiveness of rotary ultrasonic machining[J]. Ultrasonics. 2017, 74: 81-88.

[19] Wang J, Feng P, Zha T. Process monitoring in precision cylindrical traverse grinding of slender bar using acoustic emission technology[J]. Journal of Mechanical Science and Technology. 2017, 31(2): 859-864.

[20] Wang J, Feng P, Zhang J, et al. Experimental investigation on the effects of thermomechanical loading on the vibrational stability during rotary ultrasonic machining[J]. Machining Science and Technology. 2017, 21(2): 239-256.

[21] Wang J, Zhang J, Feng P. Effects of tool vibration on fiber fracture in rotary ultrasonic machining of C/SiC ceramic matrix composites[J]. Composites Part B: Engineering. 2017, 129: 233-242.

[22] Feng P, Wang J, Zhang J, et al. Research status and future prospects of rotary ultrasonic machining of hard and brittle materials[J]. J. Mech. Eng. 2017, 53: 3-21.

[23] Wang J, Zhang C, Feng P, et al. A model for prediction of subsurface damage in rotary ultrasonic face milling of optical K9 glass[J]. The International Journal of Advanced Manufacturing Technology. 2016, 83(1-4): 347-355.

[24] Wang J, Feng P, Zhang J, et al. Modeling the dependency of edge chipping size on the material properties and cutting force for rotary ultrasonic drilling of brittle materials[J]. International Journal of Machine Tools and Manufacture. 2016, 101: 18-27.

[25] Wang J, Zha H, Feng P, et al. On the mechanism of edge chipping reduction in rotary ultrasonic drilling: a novel experimental method[J]. Precision Engineering. 2016, 44: 231-235.

[26] 王健健，冯平法，张建富，等. 卡盘定心精度建模及其保持特性与修复方法[J]. 吉林大学学报 (工学版). 2016, 46(2): 487-493.

[27] Wang J, Feng P, Zheng J, et al. Improving hole exit quality in rotary ultrasonic machining of ceramic matrix composites using a compound step-taper drill[J]. Ceramics International. 2016, 42(12): 13387-13394.

[28] Wang J, Feng P, Zhang J. Investigations on the edge-chipping reduction in rotary ultrasonic machining using a conical drill[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2016, 230(7): 1254-1263.

[29] 王健健，张建富，冯平法，等. 楔式动力卡盘的径向夹持刚度特性研究[J]. 机械工程学报. 2016, 52(11): 129-139.

[30] 王健健，冯平法，张建富，等. 动力卡盘高爪最优配车锥角及配车方法[J]. 中南大学学报 (自然科学版). 2016(2016 年 06): 1896-1905.

[31] Wang J, Feng P, Zhang J. Reduction of edge chipping in rotary ultrasonic machining by using step drill: a feasibility study[J]. The International Journal of Advanced Manufacturing Technology. 2016, 87(9): 2809-2819.

清华大学优秀博士论文，2018

清华大学优秀硕士论文，2014

Elsevier优秀评审专家，2017