2001.09-2006.07, Ph. D., Tsinghua University, Dept. of Mechanical Engineering
1999.09-2001.07, B.S., Harbin Institute of Technology, Dept. of Material Sci. &Engi.
1995.09-1999.07, B.S., Harbin Institute of Technology, Dept. of Material Sci. &Engi.
[1] Min Wang, Haiyun Pei*, Lei Zhang, Lidong Guan, Rui Zhang, Yi Jia, Baowei Li, Wen Yue, Yunfang Wang, Xuetao Pei. Hepatogenesis of Adipose-Derived Stem Cells on Poly-Lactide-co-Glycolide Scaffolds: In Vitro and In Vivo Studies. Tissue Engineering Part C: Methods, 2010,Vol16(10),p1041-1050. (SCI,655DN, IF4.582 )
[2] Yue Huimin, Zhang Lei, Wang Yunfang, Liang Feng, Guan Lidong, Li shaoqing, Yan Fang, Nan Xue, Bai Cixian, Lin Feng, Yan Yongnian, Pei Xuetao Proliferation and differentiation into endothelial cells of human marrow mesenchymal stem cells(MSC) on poly(DL-lactic-co-glycolic acid) (PLGA) films. Chinese Science Bulletin, 2006, 51(10): 1328-1333
[3] Zhang Lei, Lin Feng, Yan Yongnian, Fei Xiaochen, Sun Tao. Low-temperature extrusion process of porous tubular scaffolds in tissue engineering. J Tsinghua Univ.(Sci & Tech), 2006,46(5):613-616
[4] Zhang Lei, Chen Sheng, Yan Yongnian, Zhang Renji. Analysis of the key technologies and the equipment development of the large-scale Melted Extrusion Manufacturing System. Journal of Materials Science & Technology, 2003, 19: Suppl.1 215-217
[5] Wu Rendong, Wang Xuefeng, Zhang Lei. Prestressed steel-wire winding splitt-assembled extrusion cylinder. Journal of Tsinghua University(Science and Technology, 2010(7): 974-979
[6] Wu Rendong, Wang Xuefeng, Zhang Lei. Boundary parameters during glass lubricated hot extrusion of steel pipes. J Plasticity engi., 2009,16(4):95-99.
[7] Yan yongnian, Liu Changyong, Zhang Lei, etc. Can joint technology and aero die forging hydraulic press, Aeronautical manufacturing technology, 2010(8):26-28.
[8] Lin feng, Lin Zhilin, Zhang Lei, Yan Yongnian, Zhang Renji. The application of Pre-stressd wire wound technique on Forge/Extrusion presses, China metalforming equipment & manufacturing technology. 2010(1):37-42
[9] Lin Zhilin, Han Junming, Zhang Lei, etc. Study on the concave-shaped semicircular beam of Pre-stressed steel wire wound frame. China metalforming equipment & manufacturing technology. 2009,44(5):56-60.