Education background
Dr.-Ing., School of Mechanical Engineering and Transport Systems, Technical University Berlin, Germany, 2003
M.S., Department of Precision Instruments and Mechanology, Tsinghua University, China, 1989
B.S., Department of Precision Instruments and Mechanology, Tsinghua University, China, 1987
Experience
Department of Mechanical Engineering, Tsinghua University, China, Professor, 2013.1-Present, full time
Department of Precision Instruments and Mechanology, Tsinghua University, China, Professor, 2009.12-2012.12, full time
Department of Precision Instruments and Mechanology, Tsinghua University, China, Associate Professor, 1998.8-2009.12, full time
Institute of Machine Tool and Factory Management, Technical University Berlin, Germany, Visiting Scholar, 1999.4-2003.8, full time
Department of Precision Instruments and Mechanology, Tsinghua University, China, Lecturer, 1992.12-1998.8, full time
Department of Precision Instruments and Mechanology, Tsinghua University, China, Assistant, 1989.12-1992.12, full time
Areas of Research Interests/ Research Projects
High Speed and High Performance Machining Technology
Rotary Ultrasonic Precision Machining Technology
On-Machine Verification Technology for NC Machining Accuracy
Performance Analysis and Optimization of Manufacturing Equipments
Honors And Awards
Tsinghua University Teaching Achievements, 2010
Tsinghua University Teaching Achievements, 2008
National level teaching group, 2007
Tsinghua University Teaching Achievements, 2006
National excellent course (Fundamentals of Manufacturing Engineering), 2005
Academic Achievement
[1] Pingfa Feng, Guiqiang Liang, Jianfu Zhang. Ultrasonic vibration-assisted scratch characteristics of silicon carbide-reinforced aluminum matrix composites. Ceramics International 2014，3(16): 10817-10823 (SCI).
[2] Zhang Chenglong, Cong Weilong, Feng Pingfa, Pei Zhijian. Rotary ultrasonic machining of optical K9 glass using compressed air as coolant: A feasibility study. Journal of Engineering Manufacture 2014, 228 (4): 504-514 (SCI).
[3] LI Dianxin, FENG Pingfa, ZHANG Jianfu. Calculation method of convective heat transfer coefficients for thermal simulation of a spindle system based on RBF neural network. The International Journal of Advanced Manufacturing Technology, 2014, 70(5-8): 1445-1454 (SCI).
[4] XU Chao, ZHANG Jianfu, FENG Pingfa. Characteristics of stiffness and contact stress distribution of a spindle–holder taper joint under clamping and centrifugal forces. International Journal of Machine Tools and Manufacture, 2014, 82-83: 21-28 (SCI).
[5] J.F. Zhang, P.F. Feng, C. Chen, D.W. Yu, Z.J. Wu. A method for thermal performance modeling and simulation of machine tools. The International Journal of Advanced Manufacturing Technology. 2013, 68(5-8):1517-1527 (SCI).
[6] J.F. Zhang, P.F. Feng, Z.J. Wu, D.W. Yu, C. Chen. Thermal structure design and analysis of a machine tool headstock. MECHANIKA. 2013, 19(4): 478-485 (SCI).
[7] C. L. Zhang, J. F. Zhang, P. F. Feng. Mathematical model for cutting force in rotary ultrasonic face milling of brittle materials. The International Journal of Advanced Manufacturing Technology. 2013, 69(1-4): 161-170 (SCI).
[8] C. L. Zhang, P. F. Feng, J. F. Zhang. Ultrasonic vibration-assisted scratch-induced characteristics of C-plane sapphire with a spherical indenter. International Journal of Machine Tools and Manufacture 2013, 64(1): 38-48 (SCI).
[9] Feng P F, Zhang C L, Wu Z J, Zhang J F. Effect of scratch velocity on deformation features of C-plane sapphire during nanoscratching. Strojniški vestnik-Journal of Mechanical Engineering, 2013, 59(6): 367-374 (SCI).
[10] Feng P F, Zhang J F, Wu Z J, Yu D W. An Improved Production Planning Method for Process Industries. International Journal of Production Research, 49(14), 2011, 4223-4243. (SCI)
