Selected Journal Articles
[1] Peiyuan Ding, Jianfu Zhang, Pingfa Feng, Xiangyu Zhang, Zhongpeng Zheng,and Jianjian Wang*. Fabrication of Optical Fourier Surface by Multiple-Frequency Vibration Cutting for Structural True Coloration. SMALL, 2023, 2303500. https://doi.org/10.1002/smll.202303500.
[2] Zhao, Ganlin; Feng, Pingfa; Zhang, Jianfu*; Yu, Chang; Wang, Jianjian. Rapid offline detection and 3D annotation of assembly elements in the augmented assembly. EXPERT SYSTEMS WITH APPLICATIONS, 2023.222, 119839.
[3] Lan, Tian; Feng, Pingfa; Zhang, Jianfu*; Zhou, Huilin; Wang, Jianjian*. Modeling the load capacity of frequency-tracked rotary ultrasonic machining system. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023.246, 108136.
[4] Yang, Hailong; Feng, Pingfa; Zhang, Jianfu*; Zhang, Xiangyu; Wang, Jianjian. Toward understanding the mechanism in ultrasonic cutting of silica aerogel composites using a bionic micro-serrated tool. JOURNAL OF MANUFACTURING PROCESSES, 2023.101 480-500.
[5] Zheng, Zhongpeng; Zhang, Jianfu; Feng, Pingfa; Wang, Jianjian*. Controllable fabrication of microstructures on the metallic surface using oblique rotary ultrasonic milling. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023.237: 107805.
[6] Li, Zhiwei; Zhang, Jianfu; Zheng, Zhongpeng; Feng, Pingfa; Yu, Dingwen; Wang, Jianjian*. Vibration chiseling: A backward-moving cutting for the high-efficiency fabrication of short metallic microfibers. MANUFACTURING LETTERS, 2023.36: 80-85.
[7] Chen, Zhimeng; Feng, Pingfa; Zhang, Jianfu; Feng, Feng; Zhang, Huawen; Yu, Jinhui; Wang, Jianjian*. Shaped vibration cutting: A novel fabrication method for mid-infrared relief gratings with controllable profiles. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023.317: 118007.
[8] Yang, Jinchuan; Feng, Pingfa; Zhang, Jianfu; Yang, Hailong; Wang, Jianjian*. On the oxidation resistance of sinusoidal microstructure fabricated by elliptical vibration cutting. SURFACE & COATINGS TECHNOLOGY, 2023.459: 129370.
[9] Feng, Feng; Zhao, Zirui; Wang, Zibiao; Li, Bo; Lin, Xiaoxuan; Zhang, Jianfu; Feng, Pingfa; Zhang, Xiangyu*. A calculation method for residual stress of cold expanded hole based on measured springback. MEASUREMENT, 2023.218: 113262.
[10] Liu, Jiahui; Lin, Xiaoxuan; Feng, Feng; Wang, Zibiao; Zhao, Zirui; Bai, Zhaoruo; Zhang, Jianfu; Feng, Pingfa; Zhang, Xiangyu*. Study on the surface defect of aluminum alloy hole burnishing. TRIBOLOGY INTERNATIONAL, 2023.184: 108490.
[11] Zhang, Huawen; Feng, Pingfa; Feng, Feng; Zhang, Jianfu; Wang, Chunjin; Wang, Jianjian*. Structural coloration with two-dimensional nanostructures fabricated by elliptical vibration nanoindentation. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2023.82 219-232.
[12] Ma, Ke; Wang, JianJian; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Ahmad, Shahzad. A highly temperature-stable and complete- resonance rotary giant magnetostrictive ultrasonic system. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2022.214, 106927.
[13] Ma, Ke; Wang, JianJian; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Ahmad, Shahzad. A force-insensitive impedance compensation method for giant magnetostriction ultrasonic cutting system of Nomex honeycomb composites. COMPOSITE STRUCTURES, 2022.294, 115708.
[14] Luo, Wentao; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. A temporal-spatial attention-based action recognition method for intelligent fault diagnosis. ISA TRANSACTIONS, 2022.125 459-473.
[15] Zhang, Jianfu; Ma, Ke; Wang, Jianjian*; Feng, Pingfa; Ahmad, Shahzad . A Fast and Accurate Frequency Tracking Method for Ultrasonic Cutting System via the Synergetic Control of Phase and Current. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2022.69 (2): 902-910.
[16] Zheng, Zhongpeng; Zhang, Jianfu; Feng, Pingfa; Li, Zhiwei; Wang, Jianjian*. Fabrication of hierarchical micro/nanostructures on titanium alloy by combining rotary ultrasonic milling and anodizing. MANUFACTURING LETTERS, 2022.34 43-48.
[17] Yang, Jinchuan; Feng, Pingfa; Zhang, Jianfu; Wang, Jianjian*. Design optimization of ultrasonic vibration cutting tool to generate well-decoupled elliptical trajectory. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022.119 (11-12): 7199-7214.
[18] Wang, Jianjian; Wang, Yaoke; Zhang, Jianfu; Schulze, Volker; Guo, Ping*. Blazed grating enables highly decoupled optically variable devices fabricated by vibration-assisted diamond texturing. OPTICS EXPRESS, 2022.30 (6): 8829-8846.
[19] Yang, Jinchuan; Feng, Pingfa; Zhang, Jianfu; Wang, Jianjian*. Full wedge-type insert mounting method to improve the vibration reproducibility of ultrasonic cutting system. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022.123 (5-6): 1755-1775.
[20] Huang, Bohao; Feng, Pingfa; Zhang, Jianfu*; Yu, Dingwen; Wu, Zhijun. A Novel Positioning Module and Fusion Algorithm for Unmanned Aerial Vehicle Monitoring. IEEE SENSORS JOURNAL, 2021.21 (20): 23006-23023.
[21] Ganlin, Zhao; Pingfa, Feng; Jianfu, Zhang*; Dingwen, Yu; Zhijun, Wu. Information integration and instruction authoring of augmented assembly systems. INTERNATIONAL JOURNAL OF INTELLIGENT SYSTEMS, 2021.36 (9): 5028-5050.
[22] Yang, Hailong; Wang, Jianjian; Zhang, Jianfu*; Feng, Pingfa; Wu, Zhijun; Yu, Dingwen On the material removal mechanism in rotary ultrasonic milling of ultralow-density silica aerogel composites. JOURNAL OF MANUFACTURING PROCESSES, 2021.70 621-635
[23] Luo, Wentao; Zhang, Jianfu*; Feng, Pingfa; Liu, Haochen; Yu, Dingwen; Wu, Zhijun. An adaptive adjustment strategy for bolt posture errors based on an improved reinforcement learning algorithm. APPLIED INTELLIGENCE, 2021.51 (6): 3405-3420
[24] Luo, Wentao; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. A deep transfer-learning-based dynamic reinforcement learning for intelligent tightening system. INTERNATIONAL JOURNAL OF INTELLIGENT SYSTEMS, 2021.36 (3): 1345-1365.
[25] Gao, Peng; Du, Tianyu; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen. Fatigue behavior of low alloy structural steel single-lap bolt-welded joint. STRUCTURES, 2021.29: 1988-1997.
[26] Zhou, Huilin; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. Investigations on a mathematical model for optimum impedance compensation of a giant magnetostrictive ultrasonic transducer and its resonance characteristics. ULTRASONICS, 2021.110, 106286.
[27] Ma, Ke; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. Modeling and fitting of an ultrasonic straight-blade cutting system. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021.112 (3-4): 833-843.
[28] Luo, Wentao; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. A concise peephole model-based transfer learning method for small sample temporal feature-based data-driven quality analysis. KNOWLEDGE- BASED SYSTEMS, 2020.195, 105665.
[29] Zhou, Huilin; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. An amplitude prediction model for a giant magnetostrictive ultrasonic transducer. ULTRASONICS, 2020.108, 106017.
[30] Ahmad, Shahzad; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun; Ke, Ma. Processing technologies for Nomex honeycomb composites (NHCs): A critical review. COMPOSITE STRUCTURES, 2020.250, 112545.
[31] Zhou, Huilin; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wang, Jianjian. On the optimum resonance of giant magnetostrictive ultrasonic transducer with capacitance-based impedance compensation. SMART MATERIALS AND STRUCTURES, 2020.29 (10), 105002.
[32] Ahmad, Shahzad; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. Experimental study on rotary ultrasonic machining (RUM) characteristics of Nomex honeycomb composites (NHCs) by circular knife cutting tools. JOURNAL OF MANUFACTURING PROCESSES, 2020.58 524-535.
[33] Pang, Yu; Feng, Pingfa; Zhang, Jianfu*; Ma, Yuan; Zhang, Qiaoli. Frequency coupling design of ultrasonic horn with spiral slots and performance analysis of longitudinal-torsional machining characteristics. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020.106 (9-10): 4093-4103.
[34] Zhou, Huilin; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Cai, Wanchong; Wang, Jianjian. Performance evaluation of a giant magnetostrictive rotary ultrasonic machine tool. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020.106 (9-10): 3759-3773.
[35] Cui, Ruoyu; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. A Path Planning Method for V-Shaped Robotic Cutting of Nomex Honeycomb by Straight Blade Tool. IEEE ACCESS, 2020.8: 162763-162774.
[36] Zhou, Huilin; Zhang, Jianfu*; Yu, Dingwen; Feng, Pingfa; Wu, Zhijun; Cai, Wanchong. Advances in rotary ultrasonic machining system for hard and brittle materials. ADVANCES IN MECHANICAL ENGINEERING, 2019.11 (12).
[37] Zhou, Huilin; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Cai, Wanchong. An output amplitude model of a giant magnetostrictive rotary ultrasonic machining system considering load effect. PRECISION ENGINEERING, 2019.60 340-347.
[38] Ma, Yuan; Zhang, Jianfu*; Yu, Dingwen; Feng, Pingfa; Xu, Chao. Modeling of machining distortion for thin-walled components based on the internal stress field evolution. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019.103 (9-12): 3597-3612.
[39] Luo, Wentao; Feng, Pingfa; Zhang, Jianfu*; Ren, Yan; Yu, Dingwen; Wu, Zhijun. Research on a Radiation Model for Bolt-Tightening Force Attenuation of Wheel-Type Parts. IEEE ACCESS, 2019.7 157459-157470.
[40] Wang, Shaocong; Zhang, Jianfu; Feng, Feng*; Qian, Xiang*; Jiang, Liuquan; Huang, Junlong; Liu, Binbin; Li, Jun; Xia, Yousheng; Feng, Pingfa. Fractal Analysis on Artificial Profiles and Electroencephalography Signals by Roughness Scaling Extraction Algorithm. IEEE ACCESS, 2019.7 89265-89277.
[41] Wang, Jianjian; Zhang, Jianfu; Feng, Pingfa*; Guo, Ping. Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: A critical review. CERAMICS INTERNATIONAL, 2018.44 (2): 1227-1239.
[42] Wang, Jianjian; Zhang, Jianfu; Feng, Pingfa*; Guo, Ping. Experimental and theoretical investigation on critical cutting force in rotary ultrasonic drilling of brittle materials and composites. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018.135 555-564.
[43] Wang, Jianjian; Zhang, Jianfu; Feng, Pingfa*; Guo, Ping; Zhang, Qiaoli. Feasibility Study of Longitudinal-Torsional-Coupled Rotary Ultrasonic Machining of Brittle Material. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2018.140 (5): 051008.
[44] Wang, Jianjian; Feng, Pingfa; Zhang, Jianfu*; Guo, Ping. Experimental study on vibration stability in rotary ultrasonic machining of ceramic matrix composites: Cutting force variation at hole entrance. CERAMICS INTERNATIONAL, 2018.44 (12): 14386-14392
[45] Zha, Huiting; Feng, Pingfa; Zhang, Jianfu*; Yu, Dingwen; Wu, Zhijun. Material removal mechanism in rotary ultrasonic machining of high-volume fraction SiCp/Al composites. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018.97 (5-8): 2099-2109.
[46] Wang, Jianjian; Peng, Pingfa; Zhang, Jianfu*. Reducing edge chipping defect in rotary ultrasonic machining of optical glass by compound step-taper tool. JOURNAL OF MANUFACTURING PROCESSES, 2018.32: 213-221.
[47] Wang, Jianjian; Feng, Pingfa; Zhang, Jianfu*; Guo, Ping. Reducing cutting force in rotary ultrasonic drilling of ceramic matrix composites with longitudinal-torsional coupled vibration. MANUFACTURING LETTERS, 2018.18: 1-5.
[48] Ma, Yuan; Zhang, Jianfu; Feng, Pingfa*; Yu, Dingwen; Xu, Chao. Study on the evolution of residual stress in successive machining process. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018.96 (1-4): 1025-1034.
[49] Liao, Jingping; Yu, Dingwen; Zhang, Jianfu*; Feng, Pingfa; Wu, Zhijun. An efficient experimental approach to identify tool point FRF by improved receptance coupling technique. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018.94 (1-4): 1451-1460.
[50] Zhou, Kai; Zhang, Jianfu; Xu, Chao*; Feng, Pingfa; Wu, Zhijun. Effects of helix angle and multi-mode on the milling stability prediction using full-discretization method. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2018.54 39-50.
[51] Lin, Zhihang; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. Modeling and optimization of thermal characteristics for roll grinders. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018.97 (1-4): 993-1004.
[52] Cai, Wanchong; Zhang, Jianfu*; Yu, Dingwen; Feng, Pingfa; Wang, Jianjian. A vibration amplitude model for the giant magnetostrictive ultrasonic processing system. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2018.29 (4): 574-584.
[53] Li, Bo; Feng, Pingfa; Zeng, Long*; Xu, Chao; Zhang, Jianfu. Path planning method for on-machine inspection of aerospace structures based on adjacent feature graph. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2018.54 17-34.
[54] Feng, Pingfa; Wang, Jianjian; Zhang, Jianfu*; Zheng, Jingzhen. Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites. CERAMICS INTERNATIONAL, 2017.43 (1): 791-799.
[55] Wang, Jianjian; Zhang, Jianfu; Feng, Pingfa*. Effects of tool vibration on fiber fracture in rotary ultrasonic machining of C/SiC ceramic matrix composites. COMPOSITES PART B-ENGINEERING, 2017.129 233-242.
[56] Wang, Jianjian; Feng, Pingfa; Zhang, Jianfu*; Cai, Wanchong; Shen, Hao. Investigations on the critical feed rate guaranteeing the effectiveness of rotary ultrasonic machining. ULTRASONICS, 2017.74 81-88.
[57] Liao, Jingping; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. Identification of contact stiffness of shrink-fit tool-holder joint based on fractal theory. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017.90 (5-8): 2173-2184.
[58] Cai, Wanchong; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. A bilateral capacitance compensation method for giant magnetostriction ultrasonic processing system. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017.90 (9-12): 2925-2933.
[59] Liao, Jingping; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. Identification of contact stiffness of shrink-fit tool-holder joint based on fractal theory. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017.90 (5-8): 2173-2184.
[60] Zhou, Kai; Feng, Pingfa; Xu, Chao; Zhang, Jianfu; Wu, Zhijun. High-order full-discretization methods for milling stability prediction by interpolating the delay term of time-delayed differential equations. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017.93 (5-8): 2201-2214.
[61] Wang, Jianjian; Feng, Pingfa*; Zhang, Jianfu; Shen, Hao. Experimental investigation on the effects of thermomechanical loading on the vibrational stability during rotary ultrasonic machining. MACHINING SCIENCE AND TECHNOLOGY, 2017.21 (2): 239-256.
[62] Xu, Chao; Feng, Pingfa*; Zhang, Jianfu; Yu, Dingwen; Wu, Zhijun. Milling stability prediction for flexible workpiece using dynamics of coupled machining system. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017.90 (9-12): 3217-3227.
[63] Wang, Jianjian; Feng, Pingfa; Zhang, Jianfu*. Reduction of edge chipping in rotary ultrasonic machining by using step drill: a feasibility study. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016.87 (9-12): 2809-2819.
[64] Liao, Jingping; Zhang, Jianfu*; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. Interface contact pressure-based virtual gradient material model for the dynamic analysis of the bolted joint in machine tools. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2016.30 (10): 4511-4521.
[65] Zhang, Jianfu*; Wang, Dong; Feng, Pingfa; Wu, Zhijun; Zhang, Chenglong. Material Removal Characteristics of KDP Crystal in Ultrasonic Vibration-Assisted Scratch Process. MATERIALS AND MANUFACTURING PROCESSES, 2016.31 (8): 1037-1045.
[66] Wang, Jianjian; Feng, Pingfa; Zhang, Jianfu; Zhang, Chenglong; Pei, Zhijian. Modeling the dependency of edge chipping size on the material properties and cutting force for rotary ultrasonic drilling of brittle materials. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016.101 18-27.
[67] Wang, Jianjian; Feng, Pingfa*; Zheng, Jingzhen; Zhang, Jianfu. Improving hole exit quality in rotary ultrasonic machining of ceramic matrix composites using a compound step-taper drill. CERAMICS INTERNATIONAL, 2016.42 (12): 13387-13394.
[68] Wang, Jianjian; Zha, Huiting; Feng, Pingfa*; Zhang, Jianfu. On the mechanism of edge chipping reduction in rotary ultrasonic drilling: A novel experimental method. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016.44: 231-235.
[69] Wang, Jianjian; Zhang, Chenglong; Feng, Pingfa*; Zhang, Jianfu. A model for prediction of subsurface damage in rotary ultrasonic face milling of optical K9 glass. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016.83 (1-4): 347-355.
[70] Abbasi, Sarwar Ali; Feng, Pingfa*; Ma, Yuan; Zhang, Jianfu; Yu, Dingwen; Wu, Zhijun. Influence of microstructure and hardness on machinability of heat-treated titanium alloy Ti-6Al-4V in end milling with polycrystalline diamond tools. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016.86 (5-8): 1393-1405.
[71] Wang, Jianjian; Feng, Pingfa*; Zhang, Jianfu. Investigations on the edge-chipping reduction in rotary ultrasonic machining using a conical drill. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016.230 (7): 1254-1263.
[72] Li, Dianxin; Feng, Pingfa*; Zhang, Jianfu; Wu, Zhijun; Yu, Dingwen. Method for modifying convective heat transfer coefficients used in the thermal simulation of a feed drive system based on the response surface methodology. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2016.69 (1): 51-66.
[73] Xu, Chao*; Zhang, Jianfu; Yu, Dingwen; Wu, Zhijun; Feng, Pingfa. Dynamics prediction of spindle system using joint models of spindle tool holder and bearings. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2015.229 (17): 3084-3095.
[74] Guo, Hao*; Zhang, Jianfu; Feng, Pingfa; Wu, Zhijun; Yu, Dingwen. A virtual material-based static modeling and parameter identification method for a BT40 spindle-holder taper joint. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015.81 (1-4): 307-314.
[75] Zhang, Jianfu*; Wang, Dong; Feng, Pingfa; Wu, Zhijun; Yu, Dingwen. Effect of processing parameters of rotary ultrasonic machining on surface integrity of potassium dihydrogen phosphate crystals. ADVANCES IN MECHANICAL ENGINEERING, 2015.7 (9).
[76] Wang, Jianjian; Zhang, Jianfu; Feng, Pingfa*; Wu, Zhijun; Zhang, Guobin. Modeling and simulation for the critical bending force of power chucks to guarantee high machining precision. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015.79 (5-8): 1081-1094.
[77] Ma, Yuan; Feng, Pingfa*; Zhang, Jianfu; Wu, Zhijun; Yu, Dingwen. Prediction of surface residual stress after end milling based on cutting force and temperature. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016.235: 41-48.
[78] Ma, Yuan; Feng, Pingfa*; Zhang, Jianfu; Wu, Zhijun; Yu, Dingwen. Energy criteria for machining-induced residual stresses in face milling and their relation with cutting power. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015.81 (5-8): 1023-1032.
[79] Xu, Chao*; Zhang, Jianfu; Feng, Pingfa; Yu, Dingwen; Wu, Zhijun. Characteristics of stiffness and contact stress distribution of a spindle-holder taper joint under clamping and centrifugal forces. INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, 2014.82-83 21-28.
[80] Li Dian-xin; Zhang Jian-fu; Zhang Yun-liang; Feng Ping-fa*. Modeling, identification and compensation for geometric errors of laser annealing table. JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2014.21 (3): 904-911.
[81] Feng, Pingfa*; Liang, Guiqiang; Zhang, Jianfu. Ultrasonic vibration-assisted scratch characteristics of silicon carbide-reinforced aluminum matrix composites. CERAMICS INTERNATIONAL, 2014.40 (7): 10817-10823.
[82] Li, Dianxin; Feng, Pingfa*; Zhang, Jianfu; Yu, Dingwen; Wu, Zhijun. An identification method for key geometric errors of machine tool based on matrix differential and experimental test. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C, 2014.228 (17): 3141-3155.
[83] Li, Dianxin; Feng, Pingfa*; Zhang, Jianfu; Wu, Zhijun; Yu, Dingwen. Calculation method of convective heat transfer coefficients for thermal simulation of a spindle system based on RBF neural network. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014.70 (5-8): 1445-1454.
[84] Zhang, Jianfu*; Feng, Pingfa; Chen, Chuang; Yu, Dingwen; Wu, Zhijun. A method for thermal performance modeling and simulation of machine tools. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013.68 (5-8): 1517-1527.
[85] Zhang, Chenglong*; Zhang, Jianfu; Feng, Pingfa. Mathematical model for cutting force in rotary ultrasonic face milling of brittle materials. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013.69 (1-4): 161-170.
[86] Zhang, Jianfu*; Feng,Pingfa; Wu, Zhijun; Yu, Dingwen; Chen, Chuang. Thermal structure design and analysis of a machine tool headstock. MECHANIKA, 2013. (4): 478-485.
[87] Xu, Chao*; Zhang, Jianfu; Wu, Zhijun; Yu, Dingwen; Feng, Pingfa. Dynamic modeling and parameters identification of a spindle-holder taper joint. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013.67 (5-8): 1517-1525.
[88] Zhang, Chenglong; Peng, Pingfa*; Zhang, Jianfu. Ultrasonic vibration-assisted scratch-induced characteristics of C-plane sapphire with a spherical indenter. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013.64 38-48.
[89] Feng, Pingfa; Zhang, Jianfu*; Wu, Zhijun; Yu, Dingwen. An improved production planning method for process industries. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2011.49 (14): 4223-4243.
[90] Zhang, Jian Fu*; Wu, Zhi Jun; Feng, Ping Fa; Yu, Ding Wen. Evaluation systems and methods of enterprise informatization and its application. EXPERT SYSTEMS WITH APPLICATIONS, 2011.38 (7): 8938-8948.
All publications are available at: https://thurid.lib.tsinghua.edu.cn/scholar/655032